Elevator foam glue up

This foam was glued together to make the elevator halves. Next
weekend we will probably hotwire these and mount them to the elevator
spar.

More varnishing

Varnished more spar parts today. These will me ready to mount very
soon.

Elevator spar template

When we drilled the elevator for the dean hinges, we were off by just
a little bit, but enought that they did not move smooth enough for me.

I cut the first elevator spar in half, bolted the hindges on, then
glued a scrap of plywood across the 2 halves. I now have a template
to drill my new elevator spar.

Closed first front outer spar

This will be ready to seal and possibly mount wing attach fittings to
tomorrow.

Glued second front spar

This took about 5 pz of t88 glue. I always try to mix too much glue
and have something else ready to use the extra. This time I had to
mix 2 times and Still cut it close!

Varnished 1st outer spar

This Is the first outer spar being varnished as well as it's plywood
top that will enclose it. This will be ready to close on the next
trip to the airport.

2nd front spar

We cut all the pieces including the top plywood for the 2nd front
spar. It's 98 degrees in the hanger, so no more gluing today!