Covering bottom of HS

Tonight, I covered the other side of the HS. Took about 2 hours in
total. I used the Mark Langford method of applying fiberglass. I
marked an outline on a piece of 4 mill plastic of the size and shape
the fiberglass needed to be. Then I cut a piece of peel ply a bit
oversized as well as the fiberglass.

Not wet put the fiberglass on the plastic. The outline on the plastic
helps ensure you have the right shape when you are done. If you don't
do this, your fiberglass may get distorted and not dit as you expected.

You can then peel the plastic off carefully and adjust and add peel ply.